How to Find Your Furnace Model Number
Every furnace has a rating plate with its model number. It takes about two minutes to find, and it's the one thing you need to see exactly which parts fit.
Where the rating plate is
- 1
Look on the front access doors first
Most gas furnaces have the rating plate on the inside of the lower (blower) door or the upper (burner) door. Older units sometimes have it on the outside of a side panel.
- 2
Take the lower door off if you need to
Lift it up and out. A switch behind the door cuts power to the furnace while the door is off. That is normal; it comes back on when you put the door back.
- 3
Check the cabinet walls inside
If it is not on a door, look on the inside walls of the blower or burner compartment.
- 4
Take a photo
A phone photo of the whole plate is easier to read than copying it by hand, and it is what we ask for if you call.
Mobile home furnaces (Intertherm, Miller, Nordyne) usually have the plate inside the front door of the furnace closet.
Model number or serial number?
The plate lists both. The model number tells us which furnace you have; the serial number only identifies your one unit. Use the line labelled Model No. or M/N.
Use this: the model number
Letters and numbers, often with a 3-digit heating input in it (060, 080, 100 = 60,000 to 100,000 BTU).
Not this: the serial number
Unique to your unit. It's useful for the furnace's age, but it doesn't tell us which parts fit.
What model numbers look like by brand
Enter the whole number, including any dashes and the ending (like -07 or B). Some furnaces have several revisions, and parts can differ between them.
| Brand | Example | What to look for |
|---|---|---|
| Lennox | SLP98UH070XV36BG61MPV-36B-070-07 | Starts with the series (SLP98, EL296, G61MPV). Older units end in a revision like -07. |
| Carrier / Bryant / Payne | 58PAV090-16114 | Starts with 58 (Carrier) or 3 (Bryant). The heating input is the three digits after the letters: 090. |
| York / Coleman / Luxaire | TM8E080B12MP11 | TM, TG, TP or similar, then the heating input: 080. |
| American Standard / Trane | AUH2B080A9V3VBA | Long, with no dashes. Starts with A (American Standard) or T (Trane). |
| Goodman / Amana | GMEC960603BN | G (Goodman) or A (Amana), the efficiency (96), then the heating input: 060. |
| ICP / Heil / Tempstar / KeepRite | N9MSB0801716B2 | Often starts with N, F, G or T, then the efficiency and the heating input: 080. |
| Intertherm / Miller / Nordyne | M3RL060A | Short. Mobile home furnaces often start with M. |
Found it? Search your model
Label worn or missing?
Call our parts department with a photo of the plate, or of the furnace and any stickers on it, and we'll help identify it.
778-759-9864Mon–Sat, 8:00 AM – 5:00 PM (PT)
Questions
Where is the model number on a furnace?
On the rating plate, usually on the inside of the lower (blower) or upper (burner) access door, or on an inside wall of the cabinet. Older furnaces sometimes have it on the outside of a side panel.
Is the model number the same as the serial number?
No. The model number identifies which furnace you have and decides which parts fit. The serial number identifies only your one unit; it is useful for the age of the furnace but not for finding parts.
What if the label is worn or missing?
Call our parts department at 778-759-9864 with a photo of the plate, or of the furnace and any stickers on it, and we will help identify it.

