Furnace Blower Belts, Pulleys & Bearings
Belt-drive blowers use a belt, pulleys, and shaft bearings to turn the squirrel cage, and they are still common in older and larger furnaces. Belts stretch and glaze, and bearings dry out — both are inexpensive parts that cause expensive-sounding noises.
174 blower belts, pulleys & bearings in stock, ready for same-day pickup at our Coquitlam warehouse or shipped worldwide. Homeowners and contractors buy at the same counter — no trade account needed.
Signs your belts & pulley may have failed
- Squealing on startup, or a rhythmic chirp while running
- Visible cracking, glazing, or fraying on the belt
- Reduced airflow with the motor running normally
- Rumbling or grinding from the blower bearings
Not sure which part you need? Call 1-778-759-9864 with your furnace model number and we will confirm it before you order.
Shop blower belts, pulleys & bearings by brand
Blower Belts, Pulleys & Bearings we stock
LENNOX 2-BOLT CAST IRON PILLOW BLOCK BEARING, 1
LENNOX V-BELT, COGGED, 5/8" WIDTH, 65" OUTER CIRCUMFERENCE, BLOWER
LENNOX BLOWER HOUSING FOR 11 1/2" X 10" BLOWER WHEEL
LENNOX BEARING, PILLOW BLOCK, BLOWER
LENNOX BEARING BRACKET
BLOWER BELT, 53" OUTSIDE
CARRIER BLOWER SHAFT 0.9" X 22.6"
Bearing Assembly, 2-Bolt Pillow Block, 1 11/16" Bore
Bearing Bracket
Fan Shaft
Image coming soon
040-577
50DW502929 SHAFT WITH KEYS 61X 1 11/16
Showing 11 of 174. Pick your brand above for the full list, or browse every part by number.
Belts & Pulleys questions
- How do I find the right belt?
- The size is printed on the belt itself — for example 4L360 or A36. If the old belt is unreadable, measure the outside circumference and the width, or give us your furnace model number.
- How tight should the belt be?
- About half to three-quarters of an inch of deflection at the midpoint under moderate thumb pressure. Over-tightening is the most common installation error and destroys the motor and blower bearings.
Need it today in Greater Vancouver?
Call ahead and we will set the part aside at the Coquitlam counter.